Please note: There is a minimum order quantity of 2 for this product
For bulk purchase more than 10 units, please contact our sales team for the bulk discount 1300 686 666.
This product is currently not available for distribution in WA for standard promo shipping cost, please email us for pallet quotes or alternative products in WA.
Description
The Ares Barstool by Siesta is no ordinary plastic Stool. It’s extraordinary strength is due to the entire stool being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this stool will not fade or go brittle even in the sunniest weather conditions. Siesta’s Ares Barstool is built to last in busy commercial venues, indoor or outdoor.
Features
- 5 years warranty
- Stackable
- Suitable for indoor and outdoor commercial use
- Made of UV stabilised polypropylene reinforced with glass fibre
- Dimensions (mm): 500L x 400W x 1080H
- Seat Dimensions(mm): 750 Seat Height x 360 Seat Width x 400 Seat Depth x 350 Seat Back Height x 390 Seat Back Width
- Unit Weight: 6.2kg
- SWL: 135kg
- Supplied assembled
- Weather resistant, UV Stabilised – Will not fade under direct sunlight
- Stocked in: Anthracite, Black, White, Chocolate, Taupe
- Made in Europe
-
Product Brochure
Please Note: Product Sizes, Weights & Colours may vary and are subject to change.
Test result
Tests Completed
1. Outdoor furniture - General safety requirements EN 581-1:2017
2. Seat and back static load test EN 1728:2012+AC:2013
3. Seat and back fatigue test EN 1728:2012+AC:2013
4. Leg forward static load test EN 1728:2012+AC:2013
5. Leg sideways static load test EN 1728:2012+AC:2013
6. Seat impact test EN 1728:2012+AC:2013
7. Foot rest static load test EN 1728:2012+AC:2013
8. Stability - EN 1022:2005
Seat & Back Static Load Test
| Seat Load (kg) |
Back Force (kg) |
Number of Cycles |
| 204 |
55 |
10 x 10s |
| 204 |
55 |
1 x 30 min
|
Seat Front Edge Static Load Test
| Seat Load (kg) |
Number of Cycles |
| 132 |
10 |
General Safety Requirements
- Edges of seat, back rest and arm rests rounded and chamfered
- All other parts: free from burrs, sharp edges and sharp points.
- Any load bearing part of furniture not come loose unintentionally
Tubular Components Safety Requirements
- Absence of tubular components with diameter > 7 mm and < 12 mm with a depth > 10 mm.
- Tubulars in contact with the floor are closed. Holes in them are allowed as long as they are < 7 mm or > 12 mm
Shear & Squeeze Points Safety Requirements
- Absence of shear and squeeze points, created by loads applied during normal use.
- Conformity to requirements of clause 5 of standard EN 581-1
