The Air Chair® by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Air Chair®is built to last in busy commercial venues, indoor or outdoor.
Matching chair to the Air XL Armchair®& Air Barstool®/em>
Air Chair®Comparison (Siesta vs Copy/Replica):
- The copy is not UV stabilised or resistant and will fade in direct sunlight
- The copy has no production stamp or trace to its manufacturer which is often a requirement for warranty and guarantee purposes
- The copy is not CATAS tested
Features
- 5 year warranty
- Stackable up to 4 high
- Suitable for indoor and outdoor commercial use
- Made of UV stabilised polypropylene reinforced with glass fibre
- Dimensions: 500W x 600D x 820H x 450 Seat Height
- Unit Weight: 3.7kg
- SWL: 150kg
- Supplied assembled
- Weather resistant, UV Stabilised, Glass fibre reinforced
- Stocked In: Anthracite, Black, White, Red, Orange, Green, Taupe, Mango
- Replaceable feet
- CATAS Tested
- Matching Products: Air XL Armchair® Air Barstool®/li>
- Made in Europe
-
Product Brochure
Please Note: Product Sizes, Weights & Colours may vary and are subject to change.
Video & Assembly
Test Results
Tests Completed
1. Outdoor furniture - General safety requirements EN 581-1:2006
2. Seat and back static load test EN 1728:2000
3. Seat and back fatigue test EN 1728:2000
4. Leg forward static load test EN 1728:2000
5. Leg sideways static load test EN 1728:2000
6. Seat impact test EN 1728:2000
7. Stability - EN 1022:2005
Seat & Back Static Load Test
| Seat Load (kg) | Back Force (kg) | Number of Cycles |
| 204 | 57 | 10 x 10s |
| 204 | 57 | 1 x 30 min
|
Seat Front Edge Static Load Test
| Seat Load (kg) | Number of Cycles |
| 132 | 10 |
General Safety Requirements
- Edges of seat, back rest and arm rests rounded and chamfered
- All other parts: free from burrs, sharp edges and sharp points.
Tubular Components Safety Requirements
- Absence of tubular components with diameter > 7 mm and < 12 mm with a depth > 10 mm.
- Tubulars in contact with the floor are closed. Holes in them are allowed as long as they are < 7 mm or > 12 mm
Shear & Squeeze Points Safety Requirements
- Absence of shear and squeeze points, created by loads applied during normal use.
- Conformity to requirements of clause 5 of standard EN 581-1
