Please note: There is a minimum order quantity of 2 for this product
For bulk purchase more than 10 units, please contact our sales team for the bulk discount 1300 686 666.
This product is currently not available for distribution in WA for standard promo shipping cost, please email us for pallet quotes or alternative products in WA.
Description
The Monaco lounge Armchair is an injection moulded resin chair, the non-metallic frame will never unravel, rust or decay, with rattan look seat and back. The Monaco Lounge Armchair is reinforced with glass fibre to give it impressive strength and boost the weight capacity. The Monaco Lounge Armchair features an easy assembly design that is suitable for indoor or outdoor use. The Monaco Lounge Armchair is UV stable and weather proof, it will not fade or go brittle in Australia’s harsh outdoor conditions. Strong yet lightweight, this Armchair will add class to any venue. It’s sleek and comfortable profile is pleasant to the eye so this chair is as charming as it is functional. Very easy to clean, just hose it down.
Features
- 5 years warranty
- Made of durable weather-resistant resin reinforced with glass fibre- will never unravel or rust!
- UV Protected
- Suitable for indoor and outdoor commercial use
- Dimensions: 820W x 790D x 790H x 350 Seat Height
- Optional cushions available (seat & back) in Beige only – 7 cm thick cushion covered with polyester fabric and finished with piping
- 3 Month warranty on cushions
- Stocked in: Anthracite, Chocolate
- Special order colour: White
- Supplied unassembled
- The Monaco Lounge Armchair is designed for self assembly. See assembly video at www.youtube.com/watch?v=4QDFO6rt6Bk
- Made in Europe
-
Product Brochure
The two Seat Lounge can be made with 1x Single Lounge Armchair Extension Part
Please Note: Product Sizes, Weights & Colours may vary and are subject to change.
Test result
Tests Completed
1. Outdoor furniture - General safety requirements EN 581-1:2006
2. Seat and back static load test EN 1728:2012+AC:2013
3. Seat and back fatigue test EN 1728:2012+AC:2013
4. Arm downwards static load test EN1728:2012+AC:2013
5. Arm fatigue test EN 1728:2012+AC:2013
6. Leg forward static load test EN 1728:2012+AC:2013
7. Leg sideways static load test EN 1728:2012+AC:2013
8. Seat impact test EN 1728:2012+AC:2013
9. Stability - EN 1022:2005
Seat & Back Static Load Test
| Seat Load (kg) |
Back Force (kg) |
Number of Cycles |
| 204 |
57 |
10 x 10s |
| 204 |
57 |
1 x 30 min
|
Seat Front Edge Static Load Test
| Seat Load (kg) |
Number of Cycles |
| 132 |
10 |
General Safety Requirements
- Edges of seat, back rest and arm rests rounded and chamfered
- All other parts: free from burrs, sharp edges and sharp points.
Tubular Components Safety Requirements
- Absence of tubular components with diameter > 7 mm and < 12 mm with a depth > 10 mm.
- Tubulars in contact with the floor are closed. Holes in them are allowed as long as they are < 7 mm or > 12 mm
Shear & Squeeze Points Safety Requirements
- Absence of shear and squeeze points, created by parts operated by powered mechanism.
- Absence of shear and squeeze points, created by loads applied during normal use.
- Conformity to requirements of clause 5 of standard EN 581-1
