Please note: There is a minimum order quantity of 4 for this product
For bulk purchase more than 10 units, please contact our sales team for the bulk discount 1300 686 666.
This product is currently not available for distribution in WA for standard promo shipping cost, please email us for pallet quotes or alternative products in WA.
Description
The Artemis XL Lounge Armchair by Siesta is no ordinary plastic Lounge. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Artemis XL Lounge Armchair is built to last in busy commercial venues, indoor or outdoor.
Features
- 5 year structural warranty
- Available in: Anthracite, Black, Chocolate, White ,Teak, Silver Grey & Taupe
- Dimensions: 710W x 760D x 890H x 380 Seat Height
- Made in Europe
- Optional cushions available in Beige, Grey & White only – 50mm thick cushion covered with polyster fabric & finished with piping – washable & suitable for both indoor/outdoor use
- Stackable to 4 high
- Suitable for indoor and outdoor use
- Supplied assembled
- SWL: 150 kg
- The Artemis XL Lounge Armchair is produced with a single injection of polypropylene reinforced with glass fiber obtained by means of the latest generation of air moulding technology
- Unit Weight: 10kg
- Weather resistant, UV Stabilised – Will not fade under direct sunlight
-
Product Brochure
Please Note: Product Sizes, Weights & Colours may vary and are subject to change.
Test result
Tests Completed
1. Outdoor furniture - General safety requirements EN 581-1:2006
2. Seat and back static load test EN 1728:2000
3. Seat and back fatigue test EN 1728:2000
4. Leg forward static load test EN 1728:2000
5. Leg sideways static load test EN 1728:2000
6. Seat impact test EN 1728:2000
7. Stability - EN 1022:2005
Seat & Back Static Load Test
| Seat Load (kg) |
Back Force (kg) |
Number of Cycles |
| 204 |
57 |
10 x 10s |
| 204 |
57 |
1 x 30 min
|
Seat Front Edge Static Load Test
| Seat Load (kg) |
Number of Cycles |
| 132 |
10 |
General Safety Requirements
- Edges of seat, back rest and arm rests rounded and chamfered
- All other parts: free from burrs, sharp edges and sharp points.
Tubular Components Safety Requirements
- Tubulars in contact with the floor are closed. Holes in them are allowed as long as they are < 7 mm or > 12 mm
Shear & Squeeze Points Safety Requirements
- Absence of shear and squeeze points, created by loads applied during normal use.
- Conformity to requirements of clause 5 of standard EN 581-1
